View previous topic :: View next topic |
Author |
Message |
eXtremer Op
Joined: 07 May 2008 Posts: 138
|
Posted: Wed Sep 03, 2008 3:39 am Post subject: Bots are not coming back from ping timeout |
|
|
My Bots are not coming from ping timeout although I set the "autobotchk", it passed 45 minutes and still no rejoin, why ?
*** Quits: Bot1 (~Bot1@Bot1.users.undernet.org) (Ping timeout)
*** Quits: Bot2 (~Bot2@Bot2.users.undernet.org) (Ping timeout)
Here is what in the ".autobotchk703288692.32227" file:
Code: | DO NOT EDIT THIS FILE - edit the master and reinstall.
# (.autobotchk2921987196.13566 installed on Fri Aug 1 13:44:55 2008)
# (Cron version -- $Id: crontab.c,v 2.13 1994/01/17 03:20:37 vixie Exp $)
# DO NOT EDIT THIS FILE - edit the master and reinstall.
# (.autobotchk4016117852.13588 installed on Sat May 24 15:17:50 2008)
# (Cron version -- $Id: crontab.c,v 2.13 1994/01/17 03:20:37 vixie Exp $)
0,30 * * * * /home/egg/eggdrop/Bo1.botchk
0,10,20,30,40,50 * * * * /home/egg/eggdrop/Bot2.botchk
|
What's wrong ? |
|
Back to top |
|
 |
eXtremer Op
Joined: 07 May 2008 Posts: 138
|
Posted: Wed Sep 03, 2008 3:39 am Post subject: |
|
|
Now I killed the pid from both Bots and manually started them  |
|
Back to top |
|
 |
nml375 Revered One
Joined: 04 Aug 2006 Posts: 2835
|
Posted: Wed Sep 03, 2008 9:47 am Post subject: |
|
|
Sounds like you've got a broken script. _________________ NML_375, idling at #eggdrop@IrcNET |
|
Back to top |
|
 |
eXtremer Op
Joined: 07 May 2008 Posts: 138
|
Posted: Wed Sep 03, 2008 1:59 pm Post subject: |
|
|
nml375 wrote: | Sounds like you've got a broken script. |
What to do ?  |
|
Back to top |
|
 |
nml375 Revered One
Joined: 04 Aug 2006 Posts: 2835
|
Posted: Wed Sep 03, 2008 6:47 pm Post subject: |
|
|
Does this happen on a regular basis? _________________ NML_375, idling at #eggdrop@IrcNET |
|
Back to top |
|
 |
eXtremer Op
Joined: 07 May 2008 Posts: 138
|
Posted: Thu Sep 04, 2008 2:07 am Post subject: |
|
|
nml375 wrote: | Does this happen on a regular basis? |
Rarely, I saw 3-4 times in 3 months... |
|
Back to top |
|
 |
nml375 Revered One
Joined: 04 Aug 2006 Posts: 2835
|
Posted: Thu Sep 04, 2008 9:45 am Post subject: |
|
|
That would make it rather hard tracking down the source of this behaviour :/
At best, try to see some pattern in the disconnects; ie some script or function being used every time prior the bot disconnects, etc.
I did write a watchdog-enabled botchk-script some long time ago, which should be able to handle "frozen" bots. I'll see if I can find those files lying around somewhere... _________________ NML_375, idling at #eggdrop@IrcNET |
|
Back to top |
|
 |
eXtremer Op
Joined: 07 May 2008 Posts: 138
|
Posted: Fri Sep 05, 2008 3:22 am Post subject: |
|
|
nml375 wrote: | I did write a watchdog-enabled botchk-script some long time ago, which should be able to handle "frozen" bots. I'll see if I can find those files lying around somewhere... |
I'll really apreciate  |
|
Back to top |
|
 |
nml375 Revered One
Joined: 04 Aug 2006 Posts: 2835
|
Posted: Sat Sep 06, 2008 7:46 am Post subject: |
|
|
I was able to find the watchdog-enabled botchecker..
The watchdog.tcl script should be loaded in your bot, and will simply update the atime timestamp of the pidfile once every minute.
The botchk.tcl script should be invoked from crontab or such. It will do a series of tests to determine whether your eggdrop is still running, or if it's frozen, and tries to take appropriate measures.
Unfortunately, due to the way filesystem operation works, this script will also alter the atime timestamp whenever accessing the pidfile, and thus must not be called more often than the hung/gone/dead-time. Recommended is 6+ minutes, I use 10 myself. You might get away with 5 minutes.
There is a tweak in the end of the script that tries to restore the timestamp, however it depends on an external application (touch), and is thus commented out by default. Should touch be available, you'll be able to run the script more often.
watchdog.tcl
Code: | #Watchdog part of botchk.tcl
#Simply makes eggdrop update the accesstime for it's pidfile
#on a regular basis... (kinda like "touch")
#Settings:
# botpid [path/]pid.bot
# Tells the script which file that is the pidfile...
# This should be autodetected by the script at startup,
# but under certain circumstances, it might fail..
# IF it does fail, just set this var manually, and it'll
# work just fine :)
# PS. The name of the pidfile is pid.$botnet-nick, or; if
# botnet-nick isn't set; pid.$nick DS
#set botpid pid.lamestbot
if {![info exists botpid]} {
if {[info exists botnet-nick]} {
set botpid "pid.${botnet-nick}"
putlog "Setting botpid to $botpid using \$botnet-nick"
} elseif {[info exists nick] && $nick != ""} {
set botpid "pid.$nick"
putlog "Setting botpid to $botpid using \$nick"
} else {
error "Unable to determine the name of the pid-file!\nPlease check your config-file or watchdog.tcl script..."
}
}
proc touch {file} {
set fileID [open $file "RDONLY CREAT"]
catch {gets $fileID}
close $fileID
}
proc watchdog_touch {min hour day month year} {
global botpid
touch $botpid
# putlog "Touching $botpid"
}
bind time - "* * * * *" watchdog_touch
|
botchk.tcl
Code: | #!/usr/bin/tclsh
### settings ###
#pidfile "pidfile of bot"
#set pidfile pid.botname
#userfile "userfile of bot"
#set userfile botname.user
#configfile "configfile of bot"
#set configfile botconfig
#botdir "home of your eggdrop"
#set botdir /home/somewhere
#silent 0/1
# Should we write eggdrop's output from it's startup to stdout?
set silent 0
#lockfile "file to prevent start of your eggdrop"
# Use this whenever you want to stop your bot for a longer while...
set lockfile /home/somewhere/some.lock
### Code ###
#Lets just check that our friendly user supplied all required settings :)
foreach {var what} [list pidfile "Name of pidfile" userfile "Name of userfile" configfile "Name of configfile" botdir "home of your eggdrop" silent "Whether or not to write any output from eggdrop to stdout during startup of bot" lockfile "file to prevent start of your eggdrop"] {
if {![info exists $var]} {
puts stdout "Hey buddy!\nYou messed up while configurating the botchk.tcl script!"
puts stdout "Variable not set: $var - Explanation: $what"
exit 1
}
}
#Lets check whether we should check the bot at all...
if {[file exists $lockfile]} {
exit 0
}
#proc: start_bot
#args: none
#desc: Checks whether the userfile exists
# (if not, it will try to restore it from
# backups, etc...) and then start up
# the bot again.
# Writes the output from eggdrop to stdout...
# (if selected)
proc start_bot {} {
global pidfile userfile configfile silent
if {![file exists $userfile]} {
if {[file exists "${userfile}~new"]} {
file copy "${userfile}~new" $userfile
} elseif {[file exists "${userfile}~bak"]} {
file copy "${userfile}~bak" $userfile
} else {
puts stdout "Error: Can't find any userfile or backupfile!"
exit 1
}
}
if {[file executable $configfile]} {
catch {exec ./${configfile}} temp
} {
catch {exec ./eggdrop $configfile} temp
}
if {$silent == 0} {
puts stdout $temp
}
}
#proc: restart_bot
#args: none
#desc: Checks if there's a bot running (suspected zombie),
# if so it kills it, then calls start_bot
proc restart_bot {} {
global pidfile userfile configfile
set fileID [open $pidfile "RDONLY"]
set temp [gets $fileID botpid]
close $fileID
file delete $pidfile
if {[file exists ${pidfile}~]} {
file delete ${pidfile}~
}
if {$temp > 0} {
puts stdout "Read pid: $botpid Status: " nonewline
if {[file exists "/proc/$botpid"] && [file owned "/proc/$botpid"]} {
puts stdout "Exists!\nChecking if it matches our eggdrop: "
set fileID [open "/proc/${botpid}/cmdline" "RDONLY"]
gets $fileID temp
close $fileID
if {[string compare "$temp" "eggdrop\000./${configfile}"] == 0} {
puts stdout "Matched! - killing..."
puts stdout [exec kill -9 $botpid]
}
} {
puts stdout "no such pid!"
}
}
start_bot
}
#Lets go to bot's home...
cd $botdir
#Check if the pidfile exists, if not, call start_bot
if {![file exists $pidfile]} {
puts stdout "Pidfile $pidfile does not exists!\nGuess bot is not running... Better start her up..."
start_bot
} {
#Good, the pidfile is there... Lets check how old it is..
#(4 minutes and 50 seconds should be enough...)
if {[set time [expr [clock seconds] - [set atime [file atime $pidfile]]]] > 290} {
#Too old for comfort... Lets see if this is the second time in a row that file is too old...
#(to prevent any problems caused by ex. change of the system clock...)
#(if pidfile~ exists, it's the second time in a row that the pid-file is too old...)
puts stdout "Pidfile $pidfile is old... (Havn't been touched in [expr $time/60] minutes)\nChecking for ${pidfile}~... " nonewline
if {[file exists "${pidfile}~"]} {
#It's there... Lets see if it's "real" (should contain the same pid as the real pidfile)
#Danger: reading the pidfile will change it's time, so for this script to work, the "age" check
# must be less than the interval botchk.tcl is called (currently 10 secs lower than 5 minutes,
# change "> 290" some lines above to something lower if you get problems)
# (To put it in other words, don't call botchk.tcl more often than 5 minutes (unless you decrease
# the "> 290"...)
puts stdout "Found!\nValidating ${pidfile}~... " nonewline
set fileID [open "${pidfile}~" "RDONLY"]
gets $fileID pid1
close $fileID
set fileID [open $pidfile "RDONLY"]
gets $fileID pid2
close $fileID
#It's valid... lets restart bot...
if {$pid1 == $pid2} {
puts stdout "Valid!\nRestarting..."
restart_bot
} {
#It's not valid... better remove it...
puts stdout "Not valid - removing... " nonewline
file delete -- "${pidfile}~"
}
} {
#It doesn't exist... lets create it so that we know we've already had this
#problem the next time we check...
puts stdout "Not found!\nCreating new ${pidfile}~... " nonewline
file copy -- $pidfile "${pidfile}~"
}
} {
#pidfile is current, lets remove any stray pidfile~...
if {[file exists ${pidfile}~]} {
file delete -- "${pidfile}~"
}
}
}
#tweak to restore the timestamp after reading...
#depends on touch (havn't found anything in tcl that'll do the trick :/ )
#catch {exec touch -t [clock format $atime -format "%Y%m%d%H%M.%S"] $pidfile} msg
|
_________________ NML_375, idling at #eggdrop@IrcNET |
|
Back to top |
|
 |
eXtremer Op
Joined: 07 May 2008 Posts: 138
|
Posted: Sat Sep 06, 2008 10:54 am Post subject: |
|
|
Thanks nml375, so I need to use both tcl scripts ?
What about the autobotchk ? stop it ? |
|
Back to top |
|
 |
nml375 Revered One
Joined: 04 Aug 2006 Posts: 2835
|
Posted: Sat Sep 06, 2008 11:54 am Post subject: |
|
|
Yup, you use both scripts. As said, watchdog.tcl should be loaded in your eggdrop.
The botchk.tcl replaces the botchk/autobotchk script and should be run from crontab or such. _________________ NML_375, idling at #eggdrop@IrcNET |
|
Back to top |
|
 |
eXtremer Op
Joined: 07 May 2008 Posts: 138
|
Posted: Sun Sep 07, 2008 5:30 am Post subject: |
|
|
nml375 wrote: | Yup, you use both scripts. As said, watchdog.tcl should be loaded in your eggdrop.
The botchk.tcl replaces the botchk/autobotchk script and should be run from crontab or such. |
ok, thanks. |
|
Back to top |
|
 |
eXtremer Op
Joined: 07 May 2008 Posts: 138
|
Posted: Thu Sep 11, 2008 2:03 am Post subject: |
|
|
Thanks again a lost nml375, the scripts that you gave work just perfectly, yesterday my DSL at work died (don't know why) so the internet died as well when I came and restarted the DSL and the i-net reappeared the Bots connected in a few seconds as I wanted.
 |
|
Back to top |
|
 |
moff Voice
Joined: 24 Jul 2008 Posts: 27
|
Posted: Thu Sep 11, 2008 8:06 pm Post subject: |
|
|
dumb question, soory, but how to call the botchk.tcl from cron?
with 0,10,20,30 * * * * tclsh /home/blah/botchk.tcl
or
just 0,10,20,30 * * * * /home/blah/botchk.tcl
? |
|
Back to top |
|
 |
eXtremer Op
Joined: 07 May 2008 Posts: 138
|
Posted: Fri Sep 12, 2008 3:15 am Post subject: |
|
|
I did not change anything in cron, just added the *.tcl and that's it. |
|
Back to top |
|
 |
|