egghelp.org community

[sharpie1664]

STARTING BOT IN USERFILE CREATION MODE.
Telnet to the bot and enter 'NEW' as your nickname.
This will make the bot recognize you as the master.

You have installed modules but have not selected an encryption
module, please consult the default config file for info.


what should i do here?
not quite sure

cheers

[nml375]

Make sure you load the blowfish module (as it says in the default configfile).
_________________
NML_375, idling at #eggdrop@IrcNET

[sharpie1664]

Can't load modules blowfish: /home/irc/eggdrop/modules/blowfish.so: cannot open shared object file: No such file or directory

[nml375]

As stated in your other threads, you've failed to complete all steps of compiling:

[sharpie1664]

ok i have made the modules but they are .mods now i need to get them so they are .so

[nml375]

Actually, if you've followed the above steps, you should have a directory within your home called "eggdrop/" containing all neccesary files in the proper location.

If you do insist on moving files by hand, you'd find the compiled modules, along with the compiled binary, in the root of the source-tree..
_________________
NML_375, idling at #eggdrop@IrcNET

[sharpie1664]

i have done all of the above and still get this

Eggdrop v1.6.18 (C) 1997 Robey Pointer (C) 2006 Eggheads
[15:53] --- Loading eggdrop v1.6.18 (Sun Aug 5 2007)
[15:53] Module loaded: channels
[15:53] Can't load modules blowfish: /home/irc/eggdrop/modules/blowfish.so: cannot open shared object file: No such file or directory
[15:53] Userinfo TCL v1.07 loaded (URL BF GF IRL EMAIL DOB PHONE ICQ).
[15:53] use '.help userinfo' for commands.
[15:53] * USER FILE NOT FOUND! (try './eggdrop -m eggdrop.conf' to make one)

[YooHoo]

[sharpie1664]

ok now im getting a bit futher but it now says USER FILE NOT FOUND i then type /eggdrop -m eggdrop.conf and get this STARTING BOT IN USERFILE CREATION MODE.
Telnet to the bot and enter 'NEW' as your nickname.
OR go to IRC and type: /msg ********* hello
This will make the bot recognize you as the master.

[19:21] === ********: 0 channels, 0 users.
Launched into the background (pid: 18155)

but my bot dont enter the irc channel specified what do i do now its in irc but just not a channel
cheers



Eggdrop v1.6.18 (C) 1997 Robey Pointer (C) 2006 Eggheads
[19:19] --- Loading eggdrop v1.6.18 (Sun Aug 5 2007)
[19:19] Module loaded: dns
[19:19] Module loaded: channels
[19:19] Module loaded: server
[19:19] Module loaded: ctcp
[19:19] Module loaded: irc
[19:19] Module loaded: transfer (with lang support)
[19:19] Module loaded: share
[19:19] Module loaded: compress
[19:19] Module loaded: filesys (with lang support)
[19:19] Module loaded: notes (with lang support)
[19:19] Module loaded: console (with lang support)
[19:19] Module loaded: seen
[19:19] Module loaded: blowfish
[19:19] Module loaded: assoc (with lang support)
[19:19] Module loaded: wire (with lang support)
[19:19] Module loaded: uptime
[19:19] Userinfo TCL v1.07 loaded (URL BF GF IRL EMAIL DOB PHONE ICQ).
[19:19] use '.help userinfo' for commands.
[19:19] * USER FILE NOT FOUND! (try './eggdrop -m eggdrop.conf' to make one)

[nml375]

Did you create your owner-account, such as you were instructed when you started it?

[sharpie1664]

the bot is sitting on the sever but dont now how to bring it in a room although
it should do this itself how do i exit it from off the server

cheers

[nml375]

Obviously, it's sitting there because you have not yet defined any channels.. How would your eggdrop know which channels to join if you do not define them, either in your config-file, or using the .+chan command once it's online?

In any case, simplest way of killing it, would be to dcc chat it, and use the .die command. Other option would be to use the kill command from your shell once you've found out it's pid.
_________________
NML_375, idling at #eggdrop@IrcNET

[sharpie1664]

Add each static channel you want your bot to sit in using the following
# command. There are many different possible settings you can insert into
# this command, which are explained below.
#
# channel add #gettorrents {
# chanmode "+nt-likm"
# idle-kick 0
# stopnethack-mode 0
# revenge-mode 0
# ban-time 120
# exempt-time 60
# invite-time 60
# aop-delay 5:30
# need-op { putserv "PRIVMSG #gettorrents p me cos i'm lame!" }
# need-invite { putserv "PRIVMSG #gettorrents :let me in!" }
# need-key { putserv "PRIVMSG #gettorrents :let me in!" }
# need-unban { putserv "PRIVMSG #gettorrents :let me in!" }
# need-limit { putserv "PRIVMSG #gettorrents :let me in!" }
# flood-chan 10:60
# flood-deop 3:10
# flood-kick 3:10
# flood-join 5:60
# flood-ctcp 3:60
# flood-nick 5:60

is this right this is the channel i want my bot in so y isnt it coming in? sorry to be a pain just that ive been on this all day

[nml375]

Lines starting with # are comments, and are thus not executed.
_________________
NML_375, idling at #eggdrop@IrcNET

[sharpie1664]

so what would i need to do take the # away?