| View previous topic :: View next topic |
| Author |
Message |
ganjam0n Voice
Joined: 09 May 2008 Posts: 3
|
Posted: Fri May 09, 2008 4:42 pm Post subject: Problem launching eggdrop after configuration |
|
|
Hello, sorry if i come off as bit of a eggi noob, i configured my eggdrop as to the egghelp.orgs suggestions and guide on a precompiled eggdrop on my shell server, upon launching im receiving the following error, can anyone help elaborate?.
-(~/eggi)-> ./eggdrop -m eggi.conf
Eggdrop v1.6.13 (C) 1997 Robey Pointer (C) 2002 Eggheads
[22:40] --- Loading eggdrop v1.6.13 (Fri May 9 2008)
[22:40] Listening at telnet port 48292 (all)
[22:40] Module loaded: dns
[22:40] Module loaded: channels
[22:40] Module loaded: server
[22:40] Module loaded: ctcp
[22:40] Module loaded: irc
[22:40] Module loaded: notes (with lang support)
[22:40] Module loaded: console (with lang support)
[22:40] Module loaded: seen
[22:40] Module loaded: blowfish
[22:40] Module loaded: uptime
[22:40] Tcl error in file 'eggi.conf':
[22:40] invalid command name "}"
while executing
"}"
(file "scripts/alltools.tcl" line 400)
invoked from within
"source scripts/alltools.tcl"
(file "eggi.conf" line 1350)
[22:40] * CONFIG FILE NOT LOADED (NOT FOUND, OR ERROR)
I have found that even if i comment out the tcl scripts at the end of the eggi.conf (eggdrop.conf) it does not start, when i look in ps -x theres no proccess loaded. |
|
| Back to top |
|
 |
DragnLord Owner

Joined: 24 Jan 2004 Posts: 711 Location: C'ville, Virginia, USA
|
Posted: Sat May 10, 2008 1:44 am Post subject: |
|
|
| What does it show when you comment out the alltools script and start it? |
|
| Back to top |
|
 |
DragnLord Owner

Joined: 24 Jan 2004 Posts: 711 Location: C'ville, Virginia, USA
|
Posted: Sat May 10, 2008 1:45 am Post subject: |
|
|
| Using the -nt switches may give you more information on why it is not working. |
|
| Back to top |
|
 |
ganjam0n Voice
Joined: 09 May 2008 Posts: 3
|
Posted: Sat May 10, 2008 4:45 am Post subject: |
|
|
using -nt does not give me any more information hmm.
-(~/eggi)-> ./eggdrop -nt eggi.conf
Eggdrop v1.6.13 (C) 1997 Robey Pointer (C) 2002 Eggheads
[10:41] --- Loading eggdrop v1.6.13 (Sat May 10 2008)
[10:41] Listening at telnet port 48292 (all)
[10:41] Module loaded: dns
[10:41] Module loaded: channels
[10:41] Module loaded: server
[10:41] Module loaded: ctcp
[10:41] Module loaded: irc
[10:41] Module loaded: notes (with lang support)
[10:41] Module loaded: console (with lang support)
[10:41] Module loaded: seen
[10:41] Module loaded: blowfish
[10:41] Module loaded: uptime
[10:41] Tcl error in file 'eggi.conf':
[10:41] invalid command name "}"
while executing
"}"
(file "scripts/alltools.tcl" line 400)
invoked from within
"source scripts/alltools.tcl"
(file "eggi.conf" line 1350)
[10:41] * CONFIG FILE NOT LOADED (NOT FOUND, OR ERROR)
Only one that does anything different is -n on its own but still does not elaborate on the problem.
./eggdrop -n eggi.conf
Eggdrop v1.6.13 (C) 1997 Robey Pointer (C) 2002 Eggheads
[10:45] Allocated bind table unld (flags 1)
[10:45] Allocated bind table time (flags 1)
[10:45] Allocated bind table note (flags 0)
[10:45] Allocated bind table nkch (flags 1)
[10:45] Allocated bind table load (flags 1)
[10:45] Allocated bind table link (flags 1)
[10:45] Allocated bind table filt (flags 1)
[10:45] Allocated bind table disc (flags 1)
[10:45] Allocated bind table dcc (flags 0)
[10:45] Allocated bind table chpt (flags 1)
[10:45] Allocated bind table chon (flags 1)
[10:45] Allocated bind table chof (flags 1)
[10:45] Allocated bind table chjn (flags 1)
[10:45] Allocated bind table chat (flags 1)
[10:45] Allocated bind table bot (flags 0)
[10:45] Allocated bind table bcst (flags 1)
[10:45] Allocated bind table away (flags 1)
[10:45] Allocated bind table act (flags 1)
[10:45] Allocated bind table evnt (flags 1)
[10:45] --- Loading eggdrop v1.6.13 (Sat May 10 2008)
[10:45] Logfile suffix changed. Closing all open logs.
[10:45] Listening at telnet port 48292 (all)
[10:45] Module loaded: dns
[10:45] Module loaded: channels
[10:45] Allocated bind table wall (flags 1)
[10:45] Allocated bind table raw (flags 1)
[10:45] Allocated bind table notc (flags 1)
[10:45] Allocated bind table msgm (flags 1)
[10:45] Allocated bind table msg (flags 0)
[10:45] Allocated bind table flud (flags 1)
[10:45] Allocated bind table ctcr (flags 1)
[10:45] Allocated bind table ctcp (flags 1)
[10:45] Module loaded: server
[10:45] Module loaded: ctcp
[10:45] Allocated bind table topc (flags 1)
[10:45] Allocated bind table splt (flags 1)
[10:45] Allocated bind table sign (flags 1)
[10:45] Allocated bind table rejn (flags 1)
[10:45] Allocated bind table part (flags 1)
[10:45] Allocated bind table nick (flags 1)
[10:45] Allocated bind table mode (flags 1)
[10:45] Allocated bind table kick (flags 1)
[10:45] Allocated bind table join (flags 1)
[10:45] Allocated bind table pubm (flags 1)
[10:45] Allocated bind table pub (flags 0)
[10:45] Allocated bind table need (flags 1)
[10:45] Module loaded: irc
[10:45] LANG: Section loaded: notes
[10:45] LANG: 42 messages of 47 lines loaded from ./language/notes.english.lang
[10:45] LANG: 42 adds, 0 updates to message table
[10:45] Module loaded: notes (with lang support)
[10:45] LANG: Section loaded: console
[10:45] LANG: 10 messages of 15 lines loaded from ./language/console.english.lang
[10:45] LANG: 10 adds, 0 updates to message table
[10:45] Module loaded: console (with lang support)
[10:45] Module loaded: seen
[10:45] Module loaded: blowfish
[10:45] Module loaded: uptime
[10:45] Tcl error in file 'eggi.conf':
[10:45] invalid command name "}"
while executing
"}"
(file "scripts/alltools.tcl" line 400)
invoked from within
"source scripts/alltools.tcl"
(file "eggi.conf" line 1350)
[10:45] * CONFIG FILE NOT LOADED (NOT FOUND, OR ERROR)
If i comment out the alltools.tcl then the next tcl fails like so...
[10:49] Tcl error in file 'eggi.conf':
[10:49] invalid command name "}"
while executing
"}"
(file "scripts/action.fix.tcl" line 25)
invoked from within
"source scripts/action.fix.tcl"
(file "eggi.conf" line 1351)
if i comment out all the tcls at the end, it does actually work fine funny enough, and i found compat.tcl works too, non working tcls are alltools.tcl and action.fix.tcl.
does this help you?. |
|
| Back to top |
|
 |
nml375 Revered One
Joined: 04 Aug 2006 Posts: 2857
|
Posted: Sat May 10, 2008 11:15 am Post subject: |
|
|
That would suggest those files have been damaged somehow. That, along with the fact that you're running an antique version of eggdrop makes me wonder where you downloaded it from. _________________ NML_375, idling at #eggdrop@IrcNET |
|
| Back to top |
|
 |
DragnLord Owner

Joined: 24 Jan 2004 Posts: 711 Location: C'ville, Virginia, USA
|
Posted: Sat May 10, 2008 12:35 pm Post subject: |
|
|
I also recommend that you get 1.6.19 source and compile your own.
Or, get the source for 1.6.13 yourself and upload the scripts to your shell using binary transfer (not ascii). |
|
| Back to top |
|
 |
ganjam0n Voice
Joined: 09 May 2008 Posts: 3
|
Posted: Sun May 11, 2008 1:14 pm Post subject: thanks for your replys |
|
|
thanks for your replys i`ll take your advice and do that, reason why the antique version was because of my free shells precompiled eggdrop, im not sure if they will allow me to compile my own one but i shall give it a shot.
appreciate your response |
|
| Back to top |
|
 |
|