eXtremer
Op
Joined: 07 May 2008
Posts: 138
|
 Posted: Sat May 31, 2008 4:26 am Post subject: ChanServ Auto Reop Script v5.61.b (by awyeah) |
 |
|
Hi all, awyeah made a great script but unfortunately it's not working on Undernet (X) it's made for Dalnet.
Could someone modify it so it would work on Undernet ?
The Script :
| Code: | # $Id: autoreop.tcl, eggdrop-1.6.x 2004/5 awyeah@usa.net Exp $
# Begin - Deop Protection, ChanServ Auto Reop Script v5.61.b (autoreop.tcl)
# Script Version: 5.61.b
# Built Date: November 2003, Last Updated: 25th June 2004
# Copyright © 1999-2004 awyeah (awyeah@usa.net)
# TCL script was designed to use with eggdrop v1.5.x or higher
#########################################################################
# ChanServ Auto Reop Script v5.61.b #
# #
# #
# Author: awyeah 25th June 2004 #
# Email: awyeah@usa.net Build version 5.61.b #
# Copyright © 2004 awyeah All Rights Reserved http://www.awyeah.org/ #
#########################################################################
# #
# ####### #
# PURPOSE #
# ####### #
# #
# This script serves the purpose to auto-reop an eggdrop bot when it #
# is deoped by someone on a channel. (there are some condtions) #
# #
# Basically this script is written for networks, which run a channel #
# maintainence service called 'ChanServ', like DALnet. Hence this #
# script can be only used on networks having ChanServ. #
# #
# I've made this script because sometimes people deop my eggdrop bot on #
# channels, like suppose when they perform a mass deop in a channel, or #
# maybe the bot disconnects from the server like in a netsplit and does #
# not regain channel op status, or something of the kind. #
# #
#########################################################################
# #
# ########### #
# DESCRIPTION #
# ########### #
# #
# This script reops the bot on all channels, if it is deoped by #
# any user on any channel it is on. It can be requested to work on #
# specific, user defined channels and will not request auto reop from #
# chanserv on the channels not mentioned in its working channel list. #
# #
# This is a very effective script to keep your bot oped on all #
# channels or specific channels it has access on. However, if the bot #
# is deleted from the ChanServ access list then obviously as you might #
# suspect it will not be able to regain op status on that channel. #
# #
# This script has other functions and features other than simply to #
# reop the eggdrop bot when it is deoped. It has different punishment #
# levels, many exemptions features, functions such as logging the #
# people who deop the bot and etc. #
# #
#########################################################################
# #
# ######## #
# FEATURES #
# ######## #
# #
# 1. This script has *3* settings of channels to work on. #
# - It can work on user defined channels. #
# - It can work on all matching channels the bot is deoped on. #
# - It can work on all the channels the bot is monitoring. #
# #
# 2. This script will make the bot request chanserv network service for #
# regaining ops back on channels, when it is deoped. #
# #
# 3. This script has user defined exempt flag settings, so users in #
# bot file such as owners and masters would be exempted from this #
# script and would be able to deop the bot. It also has exemption #
# settings for seperate nicks, idents, user hosts, ip addresses etc. #
# #
# 4. This script has different punishment options for the user who #
# deoped the bot, such as deoping, kicking and banning the user etc. #
# #
# 5. There is a notification feature to the user who deoped the bot. #
# Notifications can be sent in the form of private messages and #
# private notices depending upon the owners choice. #
# #
# 6. Bot owners can log the data of the people who deop the bot through #
# the course of the day and store the info a text file which created #
# in the main eggdrop dir, which would include which channel the bot #
# was deoped on, the users host, address and his nick. #
# #
#########################################################################
# #
# ##### #
# USAGE #
# ##### #
# #
# - Please unzip zipped file autoreop.zip file and place the tcl file #
# autoreop.tcl file in your eggdrops */scripts* folder along with #
# your other tcl scripts. #
# #
# - Please add a link at the bottom of your eggdrop's .CONF file to #
# the path of your autoreop.tcl, it would be something like this: #
# #
# source scripts/autoreop.tcl #
# #
# - Save your bot's configuration file #
# #
# - *RESTART* your eggdrop bot and start enjoing the script! #
# #
#########################################################################
# #
# ####### #
# CONTACT #
# ####### #
# #
# - If you have any suggestions, comments, questions or if you want to #
# report bugs, please feel free to email me at: #
# #
# awyeah@usa.net / awyeah@awyeah.org #
# #
# #
# - You can contact me on MSN Messenger, on my ID: awyeah@awyeah.org #
# #
# #
# - You can also catch me on IRC (The DALnet Network) #
# #
# /server irc.dal.net:6667, Nick: awyeah #
# #
#########################################################################
# #
# ######## #
# VERSIONS #
# ######## #
# #
# #
# v5.61.b - Added a new type of channel activation option. The bot #
# (25/06/04) will only request for ops on channels it is deoped on by #
# this new function. #
# - Added new exemption options for exempting specific nicks, #
# user idents, ip addresses and user hosts. #
# - There were two similar ban types in the banmask selector #
# fixed those and replaced the similar one by a new one. #
# - Fixed some errors in the punishment procedure. #
# - Optimized most of the settings to give a faster output. #
# #
# v4.82.b - Added a switch for users to select channels for the script #
# (16/06/04) to work on. Users can activate the script on their own #
# defined channels or activate the script on all the #
# channels the bot is monitoring. #
# - Added punishment options for the user who deoped the bot. #
# The punishment range can be from minimum to maximum #
# depending upon the type of punishment selected. #
# - Modified the user notification options to select between #
# private messages or private notices. #
# - Added a choice to send user defined notifications #
# - Added a deop user log function. Users who deop the bot #
# will be logged into a text file in the bots main *eggdrop* #
# directory along with their userhost, channel and info. #
# - Added a small feature to choose whether the bot should try #
# to reop itself when it is deoped on a channel by ChanServ. #
# #
# v3.56.b - Removed the all channels support for the script. #
# (25/05/04) Added support for users to define their own channels. #
# Users can now activate the script on specific channels #
# the bot is opped on. The bot would only request ops from #
# ChanServ on those channels which are mentioned in its #
# channel list. #
# - Also added a notice command if the owner wishes the bot #
# to notice the nick who deoped the bot, with a msg #
# telling the user who deoped the bot not to deop it. #
# #
# v3.20.b - Initial release of script #
# (08/03/04) #
# #
# #
# Latest released verions of this script which are updated and modified #
# from time to time can be found on: #
# #
# http://www.egghelp.org/ - http://www.tclscript.com/ #
# #
#########################################################################
# #
# ####### #
# CREDITS #
# ####### #
# #
# - Thanks to all my friends who gave me the idea of creating this #
# script as it has proven to be very useful. #
# #
# I hope you really appreciate the work I've done! #
# #
# #
# ./awyeah #
# #
#########################################################################
##################################################
### Start editing variables from here onwards! ###
##################################################
#----------------------------------------#
# SETUP CHANNEL ACTIVATION OPTIONS #
#----------------------------------------#
#Set the type of channels (defined, all) you would like to enable for the bot.
#USAGE: [1/2/3] (1=USER DEFINED CHANS, 2=MATCHING CHANS 3=ALL CHANS) (You can enable only one, not both!)
#Use '1' for 'user defined channels'. (Will make the bot request for ops only on channels defined for it)
#Use '2' for 'all matching channels'. (Will make the bot request for ops on any channel it is deoped on)
#Use '3' for 'all the channels' the bot is on. (Will make the bot request for ops on all channels it is on)
set deoptype "1"
#Set this to the user defined channels if you have enabled deop protection for user defined
#channels, if not then leave this empty/blank. (Set the channels on which this script would work on)
#USAGE: set deopchans "#channel1 #channel2 #channel3 #mychannel #yourchannel"
set deopchans "#mychannel"
#--------------------------------------#
# SETUP NETWORK CHANSERV OPTIONS #
#--------------------------------------#
#Set your ChanServ service nick here. This is not a case-senstivie setting.
#USAGE: Set the nick of your networks channel service, for example 'ChanServ'.
#(If your network uses ChanServ and is not DALnet, set this to only 'ChanServ' then)
#(If your network is DALnet, then you do not need to edit this as, I have set this default for DALnet)
set chanservices "chanserv@services.dal.net"
### Recommended to keep this setting to '0' (OFF) if possible ###
#Set this is you want your bot to reop itself when it is deoped on a channel by ChanServ.
#Mostly sometimes people use chanserv to deop other people on channels, because they might have
#been just removed off the channel access lists. (I would recommend to *KEEP THIS SETTING OFF*)
#USAGE: [0/1] (0=WILL NOT REOP IF DEOPED BY CHANSERV, 1=WILL REOP IF DEOPED BY CHANSERV)
#If set to '0' the bot will *NOT* reop itself if it is deoped by chanserv
#If set to '1' the bot will reop itself if it is deoped by chanserv (can cause services/mode floods)
set noreop "0"
#---------------------------------#
# SETUP USER EXEMPT OPTIONS #
#---------------------------------#
### IMPORTANT NOTE ###
#For all of the exemption settings below please *DO NOT* use wildcards
#such as: (*, !, *!*, *@*, *!*@*, @*.host.com, *@127.0.0.* etc as they maybe risky)
#(If you do not have any ident, userhost, or ip to enter then please leave the field "")
### This is a compulsory setting ###
#Set the 'user flags' for bot owners, masters, ops and etc which will be exempted from this script and
#would be able to deop the bot, which after that the bot will not reop itself again using this script.
#(Try not to leave this field empty, atleast fill it with "n" to exempt the bot owner if possible)
#Example: n=owner, m=master, o=op, v=voice, f=friend, b=bot etc
#USAGE: "m", "n", "o", or "mnf", "bfv" etc
set deopexemptflags "mnof|mnof"
#Set this to the list of 'exempted nicks', which you would like the bot to ignore when checking for
#users who deoped the bot. (If you do not have any 'nick' to exempt then, leave this as "")
#USAGE: "nick1, bot3, user5, robot7"
set deopexemptnicks "spamcheckerbot"
#Set this to the list of exempted 'user idents' which you would like the bot to ignore when checking for
#users who deoped the bot. (If you do not have any 'user ident' to exempt then, leave this as "")
#(Whois example: awyeah is cooldude@loves.you.com ===> cooldude)
#USAGE: "cooldude, myident, user, script, sweet"
set deopexemptidents "a-user-ident"
#Set this to the list of 'exempted domains' (user ip addresses) which you would like the bot to ignore when
#when checking for users who deoped the bot. (If you do not have any 'ip addresses' to exempt then, leave this as "")
#(Whois example: awyeah is cooldude@adsl-154-462.cable.myisp.com ===> cable.myisp.com)
#USAGE: "cable.myisp.com, name.myuniversity.edu, mindspring.com, cpe.net.cable.rogers.com"
set deopexempthosts "an-isp-name"
#Set this to the list of 'user hosts' (user@host) which you would like the bot to ignore when checking for
#users who deoped the bot. (If you do not have any 'user@host' to exempt then, please leave this as "")
#USAGE: "rules@127.0.0.1, i@am.eleet.com, yeah@baby.yeah.net"
set deopexemptuserhosts "i@love.you.com"
#-------------------------------------#
# SETUP USER PUNISHMENT OPTIONS #
#-------------------------------------#
#Set this if you want the bot to 'punish' the person who deoped your bot.
#USAGE: [0/1/2/3/4/5] (0=OFF, 1=DEOP, 2=KICK, 3=KICK/BAN, 4=STICKY KICK/BAN, 5=GLOBAL KICK/BAN)
#Use '0' if *DO NOT* want the bot to punish the user. (No punishment)
#Use '1' if you want the bot to 'deop' that user in the channel. (Minimal punishment)
#Use '2' if you want the bot to 'kick' that user from the channel. (Moderate punishment)
#Use '3' if you want the bot to 'kick and ban' that user from the channel. (Extreme punishment)
#Use '4' if you want the bot to 'kick ban' that user using a sticky ban from the bots ban list. (Maximum punishment)
#Use '5' if you want the bot to 'kick ban' (blacklist) that user using the bots global ban list. (Not recommended)
set deoppunish "0"
#Set this to the kick message if you have enabled to punish the user and would want to kick or
#or kick and ban the user from the channel. (This would be the kick message used to kick out the user)
set punishmsg "0,1 Deop Protection Kick 12,0 - Please 2do not deop 12me, as I am a 2channel guardian bot 12on this 2channel 12and need to be 2opped at all times."
#Set this to the ban time if you have selected to punish the user by kicking and banning the user.
#Please set the ban time in minutes over here. (in minutes)
set punishunban "10"
#-----------------------------#
# SETUP TYPE OF BANMASK #
#-----------------------------#
#Set this to the banmask type if you have selected to punish the user by the kick and ban method.
#Types of banmasks
# 1 - *!*@some.host.com
# 2 - *!*@*.host.com
# 3 - *!*ident@some.domain.com
# 4 - *!*ident@*.host.com
# 5 - *!*ident*@*.host.com
# 6 - *!*ident*@some.host.com
# 7 - nick*!*@*.host.com
# 8 - *nick*!*@*.host.com
# 9 - nick*!*@some.host.com
# 10 - *nick*!*@some.host.com
# 11 - nick!ident@some.host.com
# 12 - nick!ident@*.host.com
# 13 - *nick*!*ident@some.host.com
# 14 - nick*!*ident*@some.host.com
# 15 - *nick*!*ident*@some.host.com
# 16 - nick!*ident*@some.host.com
# 17 - nick*!*ident@*.host.com
# 18 - nick*!*ident*@*.host.com
# 19 - *nick*!*ident@*.host.com
# 20 - *nick*!*ident*@*.host.com
set deopbanmask "1"
#---------------------------------------#
# SETUP USER NOTIFICATION OPTIONS #
#---------------------------------------#
#Set this if you want the bot to give a notification warning to the user who deoped it, saying back not to
#deop it in the future. (If that user may have deoped your bot, probobaly because of any bugs or errors detected
#in the bot, then that person should contact you 'the owner' of the bot)
#USAGE: [0/1] (0=OFF, 1=ON)
set deopnotify "0"
#Set your nick here, the owner of the bot. (This is used to notify the person who deoped your bot that, you
#are the owner of this bot and that person should contact you if he has encountered any problem with the bot)
#(Please do not leave this setting empty as it is compulsory. I recommend you fill this setting)
set botownernick "deopernick"
#Set this to the type of notification warning you would like the bot to notify the user with.
#USAGE: [1/2] (1=PRIVATE MESSAGE, 2=PRIVATE NOTICE)
#Use '1' if you want the bot to notify the user with a PRIVATE MESSAGE (/msg).
#Use '2' if you want the bot to notify the user with a PRIVATE NOTICE (/notice).
#(This will only work if you have enabled the user notification option)
set notifytype "2"
#Set the notice here which you wish the bot to send to the user who deoped it. (This will only work if you have
#enabled the deop notification switch and have not set this setting as blank/empty)
set noticeuser "Please *do not* deop me. For further assistance please contact my owner *$botownernick* regarding any problems, bugs, errors or malfunctions detected in my script."
#-------------------------------#
# SETUP DEOP USER LOGGING #
#-------------------------------#
#Set this if you want to enable recording (nick, host, info and chan) for the people who deop
#the bot. (This will help you to check who deops your bot while you are offline)
#USAGE: [0/1] (0=OFF, 1=ON)
set deoplog "0"
#Set this to the file name which will be used to record and store the users nick, info and data in.
#(This file will be created in your main */eggdrop* dir, which has your other .conf, .user and .chan files)
set deopfile "deoplog.dat"
###############################################################################
### Don't edit anything else from this point onwards, even if you know tcl! ###
###############################################################################
bind mode - "*-*o*" deop:protection
proc deop:protection {nick uhost hand chan mode target} {
global botnick deoptype deopchans
if {($target == $botnick) && ($nick != $botnick)} {
if {($deoptype == 1) && ($deopchans != "") && ([string match "#*" $deopchans])} { deop:specific:chans $nick $uhost $hand $chan }
if {($deoptype == 2)} { deop:matching:chans $nick $uhost $hand $chan }
if {($deoptype == 3)} { deop:all:chans $nick $uhost $hand $chan }
if {(($deoptype != 1) && ($deoptype != 2) && ($deoptype != 3)) || ($deoptype == "0") || ($deoptype == "")} { return 0 }
}
}
proc deop:specific:chans {nick uhost hand chan} {
global botnick deopchans chanservices noreop deopexemptflags deopexemptnicks deopexemptidents deopexempthosts deopexemptuserhosts
if {([matchattr $hand $deopexemptflags $chan])} { return 0 }
if {($noreop == 0) && ([string equal -nocase $nick "chanserv"])} { return 0 }
set userident [lindex [split $uhost "@"] 0]; set ipaddress [lindex [split $uhost "@"] 1]
if {([string match -nocase *$deopexemptnicks* $nick]) || ([string match -nocase *$deopexemptidents* $userident]) || ([string match -nocase *$deopexempthosts* $ipaddress]) || ([string match -nocase *$deopexemptuserhosts* $uhost])} { return 0 }
if {(([lsearch -exact [split [string tolower $deopchans]] [string tolower $chan]] == -1) || ($deopchans == "*"))} { return 0 }
putserv "PRIVMSG $chanservices :OP $chan $botnick"
putlog "AUTO REOP: Deoped on $chan by $nick"
putlog "AUTO REOP: Catched OP NOTICE for $chan from $chanservices."
putlog "AUTO REOP: Reopping $botnick on $chan ."
utimer 2 [list deop:punish $nick $uhost $chan]
deop:record $nick $uhost $chan; deop:notify $nick $chan
}
proc deop:matching:chans {nick uhost hand chan} {
global botnick chanservices noreop deopexemptflags deopexemptnicks deopexemptidents deopexempthosts deopexemptuserhosts
if {([matchattr $hand $deopexemptflags $chan])} { return 0 }
if {($noreop == 0) && ([string equal -nocase $nick "chanserv"])} { return 0 }
set userident [lindex [split $uhost "@"] 0]; set ipaddress [lindex [split $uhost "@"] 1]
if {([string match -nocase *$deopexemptnicks* $nick]) || ([string match -nocase *$deopexemptidents* $userident]) || ([string match -nocase *$deopexempthosts* $ipaddress]) || ([string match -nocase *$deopexemptuserhosts* $uhost])} { return 0 }
putserv "PRIVMSG $chanservices :OP $chan $botnick"
putlog "AUTO REOP: Deoped on $chan by $nick"
putlog "AUTO REOP: Catched OP NOTICE for $chan from $chanservices."
putlog "AUTO REOP: Reopping $botnick on $chan ."
utimer 2 [list deop:punish $nick $uhost $chan]
deop:record $nick $uhost $chan; deop:notify $nick $chan
}
proc deop:all:chans {nick uhost hand chan} {
global botnick chanservices noreop deopexemptflags deopexemptnicks deopexemptidents deopexempthosts deopexemptuserhosts
if {([matchattr $hand $deopexemptflags $chan])} { return 0 }
if {($noreop == 0) && ([string equal -nocase $nick "chanserv"])} { return 0 }
set userident [lindex [split $uhost "@"] 0]; set ipaddress [lindex [split $uhost "@"] 1]
if {([string match -nocase *$deopexemptnicks* $nick]) || ([string match -nocase *$deopexemptidents* $userident]) || ([string match -nocase *$deopexempthosts* $ipaddress]) || ([string match -nocase *$deopexemptuserhosts* $uhost])} { return 0 }
foreach channel [channels] {
putserv "PRIVMSG $chanservices :OP $channel $botnick"
}
putlog "AUTO REOP: Deoped on $chan by $nick"
putlog "AUTO REOP: Catched OP NOTICE for $chan from $chanservices."
putlog "AUTO REOP: Reopping $botnick on *all channels*."
utimer 2 [list deop:punish $nick $uhost $chan]
deop:record $nick $uhost $chan; deop:notify $nick $chan
}
proc deop:punish {nick uhost chan} {
global botnick deopbanmask deoppunish punishmsg punishunban
if {($deoppunish == 0)} { return 0 }
if {($deopbanmask == "")} { set banmask "*!*@[lindex [split $uhost @] 1]" }
if {($punishmsg == "")} { set punishmsg "0,1 Deop Protection Kick 12,0 - Please 2do not deop 12me, as I am a 2channel guardian bot 12on this 2channel 12and need to be 2opped at all times." }
if {($deoppunish == 1) && (![string equal -nocase $nick "chanserv"])} { putserv "MODE $chan -o $nick" }
if {($deoppunish == 2) && ($punishmsg != "") && (![string equal -nocase $nick "chanserv"])} { putserv "KICK $chan $nick :$punishmsg" }
if {($deoppunish == 3) && ($deopbanmask != "") && ($punishmsg != "") && (![string equal -nocase $nick "chanserv"])} { set banmask [deop:banmask $uhost $nick]; putserv "MODE $chan +b $banmask"; putserv "KICK $chan $nick :$punishmsg"; timer $punishunban "pushmode $chan +b $banmask" }
if {($deoppunish == 4) && ($deopbanmask != "") && ($punishmsg != "") && (![string equal -nocase $nick "chanserv"])} { set banmask [deop:banmask $uhost $nick]; newchanban $chan $banmask deopprot "$punishmsg" $punishunban }
if {($deoppunish == 5) && ($deopbanmask != "") && ($punishmsg != "") && (![string equal -nocase $nick "chanserv"])} { set banmask [deop:banmask $uhost $nick]; newban $banmask deopprot "$punishmsg" $punishunban }
return 1
}
if {![file exists $deopfile] && ($deoplog == 1)} {
putlog "DEOP RECORD FILE: The \002deop user log file\002 does not exist. Creating file: \002$deopfile\002"
set file [open $deopfile w]
puts $file "DEOP RECORD DATABASE (ChanServ Auto Reop Script v5.61.b by awyeah)\n"
catch {close $file}
}
proc deop:record {nick uhost chan} {
global botnick deoplog deopfile spamrecord spamdata
if {($deoplog == "1")} {
if {![file exists $deopfile]} { set file [open $deopfile w]; puts $file "DEOP LOG DATABASE (ChanServ Auto Reop Script v5.61.b by awyeah)\n"; catch {close $file} }
set file [open $deopfile a+]; set time [unixtime]; set deoptime [ctime $time]
set date [string trim [lindex $deoptime 2]]; set month [string trim [lindex $deoptime 1]]; set time [string trim [lindex $deoptime 3]]
puts $file "\[$date $month $time\] «DEOPED ON [string toupper $chan]» $botnick deoped on $chan by: $nick ($uhost)"
close $file
return 1
}
}
proc deop:notify {nick chan} {
global deopnotify notifytype noticeuser
if {($deopnotify == 1) && (($notifytype == 1) || ($notifytype == 2)) && ($noticeuser != "") && (![string equal -nocase $nick "chanserv"])} {
if {($notifytype == 1)} { set notify PRIVMSG }; if {($notifytype == 2)} { set notify NOTICE }
putserv "$notify $nick :$noticeuser"
return 0
}
}
proc deop:banmask {uhost nick} {
global deopbanmask
switch -- $deopbanmask {
1 { set banmask "*!*@[lindex [split $uhost @] 1]" }
2 { set banmask "*!*@[lindex [split [maskhost $uhost] "@"] 1]" }
3 { set banmask "*!*$uhost" }
4 { set banmask "*!*[lindex [split [maskhost $uhost] "!"] 1]" }
5 { set banmask "*!*[lindex [split $uhost "@"] 0]*@[lindex [split [maskhost $uhost] "@"] 1]" }
6 { set banmask "*!*[lindex [split $uhost "@"] 0]*@[lindex [split $uhost "@"] 1]" }
7 { set banmask "$nick*!*@[lindex [split [maskhost $uhost] "@"] 1]" }
8 { set banmask "*$nick*!*@[lindex [split [maskhost $uhost] "@"] 1]" }
9 { set banmask "$nick*!*@[lindex [split $uhost "@"] 1]" }
10 { set banmask "*$nick*!*@[lindex [split $uhost "@"] 1]" }
11 { set banmask "$nick*!*[lindex [split $uhost "@"] 0]@[lindex [split $uhost @] 1]" }
12 { set banmask "$nick*!*[lindex [split $uhost "@"] 0]@[lindex [split [maskhost $uhost] "@"] 1]" }
13 { set banmask "*$nick*!*$uhost" }
14 { set banmask "$nick*!*[lindex [split $uhost "@"] 0]*@[lindex [split $uhost "@"] 1]" }
15 { set banmask "*$nick*!*[lindex [split $uhost "@"] 0]*@[lindex [split $uhost "@"] 1]" }
16 { set banmask "$nick!*[lindex [split $uhost "@"] 0]*@[lindex [split $uhost "@"] 1]" }
17 { set banmask "$nick![lindex [split $uhost "@"] 0]@[lindex [split [maskhost $uhost] "@"] 1]" }
18 { set banmask "$nick!*[lindex [split $uhost "@"] 0]*@[lindex [split [maskhost $uhost] "@"] 1]" }
19 { set banmask "*$nick*!*[lindex [split $uhost "@"] 0]@[lindex [split [maskhost $uhost] "@"] 1]" }
20 { set banmask "*$nick*!*[lindex [split $uhost "@"] 0]*@[lindex [split [maskhost $uhost] "@"] 1]" }
default { set banmask "*!*@[lindex [split $uhost @] 1]" }
return $banmask
}
}
putlog "\[LOADED\] ChanServ Auto Reop Script v5.61.b by \002awyeah (awyeah@usa.net)\002"
if {($deoptype == 1)} { putlog "*ENABLED* Auto Reop for \002$nick\002 on: \002$deopchans\002" }
if {($deoptype == 2)} { putlog "*ENABLED* Auto Reop for \002$nick\002 on: \002All deop matching channels\002" }
if {($deoptype == 3)} { putlog "*ENABLED* Auto Reop for \002$nick\002 on: \002All channels\002" }
if {(($deoptype != 1) && ($deoptype != 2) && ($deoptype != 3)) || ($deoptype == "0") || ($deoptype == "")} { putlog "*DISABLED* Auto Reop for \002$nick\002 because: \002No channel type has been seletected\002" }
return
|
Source : ChanServ Auto Reop
Don't tell me to change the chanservice to Undernet, cose I did but still the script is not working.
Thanks in advance. |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
