gamble27
Halfop
Joined: 05 Aug 2008
Posts: 71
|
 Posted: Sun Nov 09, 2008 2:45 am Post subject: modify to make it relay |
 |
|
| Code: | # $Id: spamdetect.tcl, eggdrop-1.6.x 2004/5 awyeah@usa.net Exp $
# Begin - Channel Spam Bot Detector Script v4.58.ab (spamdetect.tcl)
# Script Version: v4.58.ab
# Built Date: 24 September 2003, Last Updated: 18 June 2004
# Copyright © 1999-2004 awyeah (awyeah@usa.net)
# TCL script was designed to use with eggdrop v1.5.x or higher
# Please *READ* the README.HTML file included in this script package.
# It will guide you through the script setup procedure and instructions.
# Copyright © 1999-2004 awyeah All Rights Reserved
# [Module 1: spamdetect.tcl]
##########################################
### Start editing variables from here! ###
##########################################
#--------------------------------#
# SETUP SCRIPT VARIABLES #
#--------------------------------#
#Set channel(s) on which you want to active on. Multiple channels are supported now.
#USAGE: "#chan1 #chan2 #chan3 #mychan #yourchan" (Both of your bots should be on these channels)
#If you have multiple channels, then the channels mentioned in both scripts on both bots should
#resemble each other, i.e. they should all match each other and none should be missing in either script.
#(If you don't have multiple channels to run this script on, you can set one default channel as well)
set cyclechans "#jakarta"
#Set nick of your oped bot, the one which you will set in your other script when editing.
#USAGE: Set the nick of the bot in which you will set the other spamkick.tcl script in
#(This nick can only be one bot! not more than one!)
set spamopbot "heythere"
#----------------------------------#
# SETUP AUTHORIZATION PINS #
#----------------------------------#
### IMPORTANT - PLEASE READ ###
#I suggest you change these PINS to any random PINS you would like. Keeping these default settings
#is not recommended. (Remember not to enter any special characters such as ascii codes and etc only
#alphabets and numbers)
#Set a random authorization PIN1. PIN1 must be same as the PIN1 you will enter afterwards in your
#spamkick.tcl (This is a case-sensitive setting)
set spamauthone "L"
#Set a random authorization PIN2. PIN2 must be same as the PIN2 you will enter afterwards in your
#spamkick.tcl (This is a case-sensitive setting)
set spamauthtwo "ES"
#Set a random authorization PIN3. PIN3 must be same as the PIN3 you will enter afterwards in your
#spamkick.tcl (This is a case-sensitive setting)
set spamauththree "O"
#------------------------------------#
# SETUP CHANNEL CYCLING TIMERS #
#------------------------------------#
#How many minutes should the bot idle in channel before it parts for a cycle. (mins)
#USAGE: Use a range of: '8 - 30 mins' when setting this. (Don't use below than 5 as the bot will
#be under stress on a big channel and to keeping it more than 30 will make it detect less spammers)
set spamcycleidle "10"
#How many seconds should the bot stay gone from the channel in the cycle before it rejoins the channel. (secs)
#USAGE: Use a range of: '90 - 300 secs' when setting this. (Don't use a less setting than 60 as it might cause
#join part floods on idler/silent channels and keeping it more than 300 will make it detect less spammers)
set spamcyclegone "120"
#---------------------------------------#
# SETUP SPAM DETECTION WORDLIST #
#---------------------------------------#
#Set the spam detecting words. If any of these words are matched against a message in the private query
#or notice by a user then that user will be declared as a spammer and would be kicked/banned out of the
#channel. (Note: The words I have currently set should be sufficient to catch almost any spammer)
#USAGE: Add words which spammers mostly use when spamming (wildcards such as "*" are accepted)
set spamwords {
"*# *"
"#*#*#*"
"#* #*"
"#* #* #*"
"#* * #* *"
"#* * #* * #* *"
"join*"
"/join*"
"*join #*"
"*join * #*"
"*/join #*"
"*/join * #*"
"*/join"
"*/join*"
"*join#*"
"*join*#*"
"*/j #*"
"*/j* #*"
"*/j* * #*"
"goto"
"go to*"
"www.*"
"visit*"
"http*"
"ftp*"
"server"
"/s*"
"/j*"
"come"
"come to*"
"*go * #*"
"*to #*"
"*come *#*"
"come to #*"
"come to* #*"
"come #*"
"come /j*"
"come /join*"
"come /join #*"
"come *join #*"
"visit #*"
"visit* #*"
"goto #*"
"goto* www.*"
"goto* #*"
"go to #*"
"go to* #*"
"try #*"
"try* #*"
"*geocities*"
"*angelfile*"
"*.com*"
"*.net*"
"*.org*"
"*.info*"
"*.biz*"
"*.us*"
"*.tv*"
}
#-----------------------------------------#
# SETUP RANDOM BOT TALK PROCEDURE #
#-----------------------------------------#
#Set random replies here for the bot's first message to check if the user is a spammer.
#USAGE: Add words such as: "hi", "hello", "hey!" etc. (The ones I have currently added
#should already be sufficient enough)
set spamfirstmsg {
"hi"
"hey"
"heya!"
"hi!"
"y0!! :)"
"hey man"
"hey dude :p"
"yooo"
"hieeee"
"hiya"
"hi!"
"hie"
"hey!!"
"hey hey! :)"
"hiya!"
"hie!"
"yo!"
"hey!"
"ho ho ho! :))"
"look whos here!! :)"
"yo yo man"
"hiiii"
"hey its you! :x"
"hiieeee!!"
"hi hi!"
"hey its u!"
"heeeeeey!"
"hiya baby :P"
"yes, hieeeee!"
"haalooo!"
"heeeloooo!"
"yes, hieeee! :x"
"yoooooo!"
"hiyya!"
"hello babeh :)"
"hello baby!"
"hiiiiii!"
"yes, hi"
"haloooo baby"
"same to u :D"
"same to ya"
"yes, hello!"
"yahhh!"
"errr..."
"who is you??!"
}
#Set random words here for the bot's second message to check if the user is a spammer.
#USAGE: Add words such as: "how are u", "whats up?", "asl plz" etc. (The ones I have currently
#added should already be sufficient enough)
set spamsecondmsg {
"whats up?!"
"whats cookin'?"
"whatcha up to? :))"
"hey! hows ya??"
"hows ya!?"
"hows ya?, mate!"
"how r u"
"how are you doing?"
"how r u?"
"howdie? :x"
"howdie? mate!"
"hows ya doin?"
"hows ur gf doing?"
"hows you doin?"
"whats cookin' mack!? :p"
"how how, how are you brown cow?"
"whats your name?!"
"what have ya been upto? eh?"
"how are you?"
"where ya from!?"
"hows ya been doin? :)"
"a/s/l?"
"what do ya do??!"
"whats ur name?"
"whats ya name? :/"
"where do you live?"
"where are you from?!"
"how old are ?"
"how old r u?"
"a/s/l? plz"
"are u m/f?"
"m or f?"
"male or female?"
"male/female?"
"asl plz"
"asl please :)"
"how r u doing?"
"how r you?"
"how are u?"
"a/s/l please!"
"how have u been? :D"
"where did u go?"
"where did you go?"
"what do you do?"
"what do u do?!"
"how can i help you?!"
"what do you need?"
"what do ya want!"
"what do you want?"
"do you know me?!"
"do i know you?"
"do u know me?"
"do i know u? hmm"
"have we talked before?!"
"have we met before?"
}
#Set the time in seconds after which a user messages the bot so the bot would reply with its
#first random talk message to the user to check if that user is a spammer or not.
#USAGE: Use a range of: '30 - 90' secs when setting this
set spamfirstmsgtime "60"
#Set the time in seconds when the the bot will message second random talk message to the user,
#after it has messaged the first random message to check if the user is a spammer or not.
#USAGE: Use a range of: '100 - 250' secs when setting this
set spamsecondmsgtime "120"
#-----------------------------------------#
# SETUP EXEMPTED NICKS/IP ADDRESSES #
#-----------------------------------------#
#Set this to the list of exempted nicks, which you would like the bot to ignore and wouldn't
#want to check these nicks for spam. These nicks could be of other spam cycler bots in the channel.
#(If you do not have any 'nick' to exempt to then, please set this empty/blank as "")
#USAGE: "nick1, bot3, user5, robot17, mybot4"
set spamexemptnicks "Chap"
#Set this to the list of exempted ip addresses (user idents and hosts) which you would like the
#bot to ignore when checking users for spam. These hosts or virtual hosts (vhosts) could be of other
#spam cycler bots in the channel usually being run by other ops in the channel on other scripts.
#Please *DO NOT* use wildcards such as: (*, !, *!*, @*.host.com, *@127.0.0.* etc as they maybe risky)
#(If you do not have any 'user@host' to exempt to then, please set this empty/blank as "")
#USAGE: "rules@127.0.0.1, i@am.eleet.com, phear@me.kthx.com, awyeah@ownsyou.com, yeah@baby.yeah.net"
set spamexempthosts ""
#------------------------------------#
# SETUP SERVICES NOTICE IGNORE #
#------------------------------------#
#Set the name of your Network's 'channel service' here.
#For example: *ChanServ* on DALnet - *X* on Undernet
#(If your network doesn't have a channel service such as the ones listed above in the examples then
#keep this field empty/blank like: "")
set spamchanserv "ChanServ"
#Set the name of your Network's 'nick service' here.
#For example: *NickServ* on DALnet
#(If your network doesn't have a nick service such as the one listed above in the example then keep
#this field empty/blank like: "")
set spamnickserv "NickServ"
#Set the name of your Network's 'memo service' here.
#For example: *MemoServ* on DALnet
#(If your network doesn't have a memo service such as the one listed above in the example then keep
#this field empty/blank like: "")
set spammemoserv "MemoServ"
#Set the address/host of your Network's Services service here.
#For example: ChanServ, NickServ, MemoServ on DALnet ===> serivce@dal.net - USE: 'dal.net'
#For example: X on Undernet ===> service@undernet.org - USE: 'undernet.org'
#For example: Q on Quakenet ===> service@cserve.quakenet.org - USE: 'cserve.quakenet.org'
#(If your network doesn't have any network service whose host can be entered here, then please leave
#this field empty/blank like: "") (I have set the default host for DALnet users)
set spamnetworkhost "dal.net"
##############################################################################
### Don't edit anything else from this point onwards even if you know tcl! ###
##############################################################################
bind evnt - connect-server spam:reset:inactive
bind evnt - prerestart spam:reset:inactive
set cyclechans [split $cyclechans]
set cyclechanslwr [string tolower $cyclechans]
foreach cyclingchan $cyclechanslwr { channel add $cyclingchan }
if {![string match *spamcycle* [timers]]} { timer $spamcycleidle spam:channel:cycle }
proc spam:reset:inactive {type} {
global cyclechans
foreach cyclechan [string tolower $cyclechans] {
channel set $cyclechan -inactive
}
return 0
}
proc spam:channel:cycle {} {
global botnick cyclechanslwr spamcycleidle spamcyclegone
foreach cyclechan $cyclechanslwr {
channel set $cyclechan +inactive
putlog "CYCLE: Cycling $cyclechan every : $spamcycleidle mins . Rejoin desynched on $cyclechan to: $spamcyclegone secs ."
utimer $spamcyclegone "channel set $cyclechan -inactive"
}
if {![string match *spamcycle* [timers]]} {timer $spamcycleidle spam:channel:cycle}
return 0
}
bind msgm - * private:spam:detector
bind notc - * notice:spam:detector
proc private:spam:detector {nick uhost hand text} {
global botnick cyclechanslwr spamwords spamopbot spamauthone spamauthtwo spamauththree spamfirstmsgtime spamsecondmsgtime spamchanserv spamnickserv spammemoserv spamnetworkhost spamexemptnicks spamexempthosts
if {([string match -nocase *$spamexemptnicks* $nick]) || ([string match -nocase *$spamexempthosts* $uhost]) || ([string match -nocase *$spamnetworkhost* $uhost]) || ([string equal -nocase $nick $spamchanserv]) || ([string equal -nocase $nick $spamnickserv]) || ([string equal -nocase $nick $spammemoserv]) || ([matchattr $hand mnof|mnof]) || ($nick == $botnick)} { return 0 }
if {($nick != $botnick)} {
utimer $spamfirstmsgtime [list spam:first:msg $nick]; utimer $spamsecondmsgtime [list spam:second:msg $nick]
set spamnick $nick; set spamaddress $uhost; set spammsg $text; set spamtype MESSAGE
foreach i [string tolower $spamwords] {
if {[string match *$i* [string tolower $text]]} {
foreach cyclechan $cyclechanslwr {
if {(![isop $nick $cyclechan]) && (![isvoice $nick $cyclechan])} {
putserv "PRIVMSG $spamopbot :$spamauthone $spamauthtwo $spamauththree *MESSAGE*: $spamaddress $spamnick MSG: ==> $spammsg "; return 0
}
}
}
}
}
}
# (i am eleet... kthx)
proc spam:first:msg {nick} {
global spamfirstmsg
putserv "PRIVMSG $nick :[lindex $spamfirstmsg [rand [llength $spamfirstmsg]]]"
return 1
}
proc spam:second:msg {nick} {
global spamsecondmsg
putserv "PRIVMSG $nick :[lindex $spamsecondmsg [rand [llength $spamsecondmsg]]]"
return 1
}
proc notice:spam:detector {nick uhost hand text {dest ""}} {
global botnick cyclechanslwr spamwords spamopbot spamauthone spamauthtwo spamauththree spamfirstmsgtime spamsecondmsgtime spamchanserv spamnickserv spammemoserv spamnetworkhost spamexemptnicks spamexempthosts
if {([string match -nocase *$spamexemptnicks* $nick]) || ([string match -nocase *$spamexempthosts* $uhost]) || ([string match -nocase *$spamnetworkhost* $uhost]) || ([string equal -nocase $nick $spamchanserv]) || ([string equal -nocase $nick $spamnickserv]) || ([string equal -nocase $nick $spammemoserv]) || ([matchattr $hand mnof|mnof]) || ($dest != $botnick)} { return 0 }
if {($dest == $botnick)} {
utimer $spamfirstmsgtime [list spam:first:notc $nick]; utimer $spamsecondmsgtime [list spam:second:notc $nick]
set spamnick $nick; set spamaddress $uhost; set spammsg $text; set spamtype NOTICE
foreach i [string tolower $spamwords] {
if {[string match *$i* [string tolower $text]]} {
foreach cyclechan $cyclechanslwr {
if {(![isop $nick $cyclechan]) && (![isvoice $nick $cyclechan])} {
putserv "PRIVMSG $spamopbot :$spamauthone $spamauthtwo $spamauththree *NOTICE*: $spamaddress $spamnick NOTC: ==> $spammsg "; return 0
}
}
}
}
}
}
# (*awyeah* rules!)
proc spam:first:notc {nick} {
global spamfirstmsg
putserv "NOTICE $nick :[lindex $spamfirstmsg [rand [llength $spamfirstmsg]]]"
return 1
}
proc spam:second:notc {nick} {
global spamsecondmsg
putserv "NOTICE $nick :[lindex $spamsecondmsg [rand [llength $spamsecondmsg]]]"
return 1
}
putlog "\[LOADED\] Spam Detector Script v4.58.ab by \002awyeah (awyeah@usa.net)\002"
putlog "\002\***ACTIVATED***\002 Spam Dectector Bot \002(Channel Cycler Bot: *$nick*)\002 on:\002 $cyclechans\002"
return
|
this is awyeah tcl currently it relay the spam it gets to the opped bot in channel,however i want it to actually relay it to my specified channel. i jus wan it to cycle detect spam and relay to my specific channel. thanks
Moderated: Moved to the proper category in the forum, and placed the code within a code-block.
/NML_375 |
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
